iCarsoft OP V2.0 for Opel/Vauxhall

Description

PRODUCT FEATURES

1.iCarsoft OP V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.

2.Support OBDII/EOBD Ten Modes of Operation

3.Read Live Data

4.Full ECU Diagnosis

5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC

6.Easy To Use With Silicone Keys

7.Oil Light/Service Reset: Support service lamp reset.

8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.

9.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.

10.Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.

12.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.

13.The Print Data function allows you printing out diagnostic data recorded by the scan

14.Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.

15.DTC Library to lookup when user is operating this tool.

16.Upgrade Via PC

17.multi-language

OBDII FUNCTION

1. Read Codes
2. Erase Codes
3. I/M Readiness — I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission related fault.
6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most

recently performed tests from the vehicle ‘ s on-board computer.

7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic

monitoring tests for specific components/systems.

8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.

10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes

11.Turn off Check Engine Light (MIL), clear codes and reset monitors

12. Read live PCM data stream
13. Support CAN (Controller Area Network) and all other

14.Multilingual menu and DTC definitions- English, Spanish, and German, etc

15.Read pending DTCs

16.Read permanent DTCs

17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

SPECIFICATIONS

▪ Display: 4.0″ TFT LCD, 480*320 Pixels

▪ Operation Temperature: 0°C ~ 50°C

▪ Storage Temperature: -20°C ~ 70°C

▪ Operating Voltage: 9 ~ 18V

▪ Operating Current: 150mA@12V(Typical)

▪ Power Consumption: 1.8W (Typical)

▪ Dimension: 206*104.1*32.6 mm (L x W x H)